On the DM-780 toolbar, click on the "Program Options" icon. Once you have the TX button configured click the "SAVE" button on the bottom of the configuration window and you will be returned to the main DM780 window.
If you are using a Kenwood TS-590 series radio, instead of selecting the "TX" option from the "Select Button" menu, select the "TX DATA" option to configure the TX button. There is one exception to the above setting. This configures the TX button in the Radio Pane to use the proper CAT commands for your radio to activate the digital PTT when you begin a digital transmission. Once this is open, select and highlight "TX" as shown above, and click the "OK" button on the bottom of the Select button menu. This will open the "Select Button) options screen as seen below.
Regardless of what radio your using, a "TX" button must be configured in order for DM780 to key Your radio from within the digital modes, so, our next step is to place your cursor on the button marked "TX" (in the image below) and left-click. Be certain there is a check mark in the box to Automatically connect, then click on the "Connect" button. These settings allow DM- 780 to communicate to the Rig Control module of HRD via the internal IP server in the HRD software. Be certain it shows an "Address" of "localhost" and a port of "7809". In the image above you will first see the HRD User interface information. This opens the Radio Pane configuration page as seen below. The buttons displayed are all dependent of the exact manufacturer and model of your radio, however this will give you an idea of how to configure the radio pane for DM-780.Ĭlick the "Configuration" icon indicated by the red arrow. Your radio pane may not look exactly like the one to the left. On the DM780 top menu click on VIEW > then click on RADIO and the following Radio Pane will appear on your display. Another option to open the Radio Pane is to click on "VIEW" on the main menu and select "Radio Pane" from the menu options.Īn important step in setting up DM780 is the configuration of the Radio Pane. On the main screen click on the "Radio" icon to open the "Radio Pane" on the left side of your DM-780 display. These instructions are primarily for those who are connected to their radio via a USB cable and he radio has a built-in soundcard. If you read and follow these instructions carefully you should be able to get DM-780 up and running with your radio in no time at all. The following are generic instructions for setting up Digital Master 780 (DM-780). Solution home Knowledgebase Digital Master 780 Generic Configuration For DM-780
0 kommentar(er)
